4.8 Google reviews·Free shipping Australia-wide·3-year warranty
The 60-second primer

How does a portable power station actually work?

Five questions, plain-English answers, real numbers — not specs.

Question 1

How do they recharge?

Four ways to refill the battery. Most Voltsen units accept three at once.

Fastest

Wall socket (240V AC)

Most units fully recharge in 1–2 hours from a standard Australian wall socket. UPS-grade units (Roam 1800, Base 2400) keep your appliances running while they themselves charge.

Free fuel

Solar panel (MPPT)

Silent, free fuel once you own the panel. A 200W foldable panel refills a 1,000Wh unit in roughly 6 hours of strong sun. Larger Base units take up to 1,800W of solar in.

Top-up

12V car socket

Slow — typically 8–10 hours for a full refill — but useful while driving between camps. Plug into your cigarette lighter or a dedicated Anderson plug.

Smaller units

USB-C Power Delivery

Works on the smaller units only (Spark 270, Roam 300). Up to 100W in via a single USB-C cable — the same charger that runs your laptop.

Most Voltsen units accept three of these four sources simultaneously — so you can wall-charge while driving while solar tops it up. Specific input options vary by model — check each product page.

Question 2

What do people actually power with them?

Three groups of buyers, three very different appliance lists.

Use case 1

Camping & 4WD

  • 12V fridge50–80W
  • LED camp lights10W
  • Phone charging15W
  • Drone batteries60W
  • Laptop60W
  • CPAP (average)30W
Use case 2

Caravan & RV touring

  • Everything from campingplus →
  • Induction cooktop1,800W
  • Kettle1,500W
  • Hair dryer1,500W
  • Small TV100W
  • Microwave1,000W
Use case 3

Home backup

  • Fridge (cycling)150–200W
  • Modem / router15W
  • Lights (per bulb)10W
  • CPAP (average)30W
  • Kettle1,500W
  • Gas heater fan60W
If you can plug it into a normal Australian wall socket and it draws less than your unit's rated AC output, it will run. Voltsen units are all pure sine wave — safe for CPAPs, laptops, fridges and other sensitive electronics.
Question 3

How long will it actually last?

Real numbers, every unit, every common appliance. Skip the spec sheet maths.

runtime (hours) ≈ (battery Wh × 0.85) ÷ appliance watts

The 0.85 is real-world efficiency loss from the inverter and battery management — it's almost never published, but it's the honest number.

What you're running Spark 270 Roam 300 Roam 700 Roam 1800 Base 2400
Battery 270Wh236Wh472Wh945Wh2,048Wh
Usable (×0.85) 228Wh201Wh401Wh803Wh1,741Wh
Phone charges (15W) 15132753116
Laptop work (60W) 3.8 h (USB-C)3.4 h6.7 h13.4 h29 h
LED lights (10W) n/a (DC only)20 h40 h80 h174 h
12V fridge (60W avg) n/a3.4 h6.7 h13.4 h29 h
CPAP overnight (30W avg) n/a~1 night~2 nights~3–4 nights~8 nights
TV (100W) n/a2 h4 h8 h17 h
Kettle (1500W) n/an/a — exceeds AC ratingn/a — exceeds AC rating32 min70 min
Microwave (1000W) n/an/a — exceeds AC ratingn/a — exceeds AC rating48 min105 min
Hair dryer (1500W) n/an/a — exceeds AC ratingn/a — exceeds AC rating32 min70 min
Induction cooktop (1800W) n/an/a — exceeds AC ratingn/a — exceeds AC ratingn/a — exceeds AC rating58 min

Real-world runtime varies ±15% depending on temperature, battery age, and how much of the unit's capacity you use (running deeper into the battery is less efficient). These numbers assume room temperature and a new unit. The Spark 270 is DC-only (USB-C PD output, no AC outlet) — high-draw appliances aren't applicable.

Question 4

How do I work out what size I need?

A four-step recipe. Takes about 90 seconds with a calculator.

1

List the appliances

Write down everything you want to run at the same time on the same trip.

2

Add up the watts

Multiply each appliance's wattage by hours you'll run it. Sum the total to get Wh needed per day.

3

Add 25% buffer

Covers inverter efficiency loss, cold-weather capacity dip, and future appliances you haven't bought yet.

4

Match to a unit

Pick the smallest Voltsen unit whose battery capacity covers your buffered total.

Worked example — weekend camping

12V fridge (60W × 24h = 1,440Wh) + LED lights (10W × 8h = 80Wh) + phone charging (15W × 2h = 30Wh) + laptop (60W × 4h = 240Wh) = 1,790Wh per day.

Add 25% buffer → 2,238Wh.

Recommended unit: Base 2400 (2,048Wh) — runs the kit for a full day, then recharge from solar on day 2.

Use our size-finder tool →

Question 5

How are Voltsen units different from EcoFlow, Jackery or Bluetti?

Five honest differentiators. No bashing — just where we genuinely beat the imports.

Local warranty handling

3 years, handled from our Oakleigh VIC warehouse. No shipping units back overseas. Competitor claim turnaround averages 6–12 weeks; ours is 5–10 business days.

LMFP chemistry

Next-generation lithium chemistry that delivers ~70% capacity at -20°C vs ~50% for plain LFP. Matters in alpine country and winter trips.

Free AU shipping everywhere

Including WA, NT and regional Queensland. Most imports charge $50–$200 freight or restrict remote delivery altogether.

Designed for Australian voltage

Native 230V / 50Hz Type I AU plugs, RCM-marked, AS/NZS-compliant. Some imported units run on 110V transformers or US plug adapters.

15–25% lower price

Same cell supply chain, same engineering as the big brands. The difference is we're not funding global multi-million-dollar marketing budgets.

See the full side-by-side at Compare → — every spec, every price, every warranty term.

Ready to reserve yours?

Refundable $50 deposit · 8-week delivery · 3-year warranty handled in Australia.

Shop the range →